News Releases

Information posted is accurate at the time of posting, but may be superseded by subsequent press releases.

View News Release in PDF Format
  Jul 17, 2008 - 09:30 ET
Lundin Mining Corporation: Major New Deposit at Neves-Corvo


TORONTO, ONTARIO--(Marketwire - July 17, 2008) - Lundin Mining Corporation ("Lundin Mining" or the "Company") (TSX:LUN)(NYSE:LMC)(OMX:LUMI) is pleased to announce the discovery of a new zinc-copper deposit at its 100% owned Neves-Corvo mine in southern Portugal.

This new deposit has been named the Lombador East deposit and contains the thickest, highest-grade zinc intersections ever encountered at the Neves-Corvo mine, including 89.2 metres grading 8.43% zinc.

Eight drill holes currently define this new deposit. All eight holes contain thick sections of massive sulphide zinc mineralization with four of the eight holes intercepting greater than 65 metres of greater than 8% zinc that each include wide intervals of greater than 10% zinc. Please see attached maps.

The Lombador East deposit was initially encountered in drillhole NF34 which was completed in August of 2007. This was part of last year's successful Neves-Corvo exploration program which centred on the Lombador South deposit and defined a Measured and Indicated Resource of 17.3 million tonnes grading 7.5% zinc and 1.9% lead increasing the total Proven and Probable zinc reserves at Neves-Corvo by 207% (refer to March 28, 2008 news release).

Drillhole NF34 was designed as a large step-out down-dip of the Lombador South deposit and intersected 92 metres of massive sulphide, including a 67 metre section (estimated true width) which assayed 8.03% zinc. The hole also intersected a 16 metre section of stockwork mineralization which assayed 3.92% copper. Seven additional holes have now been completed into the new deposit, some of which have also intercepted significant copper mineralization. This new deposit has the potential to be the largest combined zinc-copper deposit yet discovered at Neves-Corvo. Assay composites from these holes are shown in the table below:

                               Inter-   True
                                 val   Width
Drillhole   From (m)    To (m)    (m)     (m)  Cu %   Pb %   Zn %    Ag ppm
NF34(1)     1,151.8   1,219.0   67.2    67.2   0.31   2.93   8.03     77.10
 incl       1,168.0   1,189.0   21.0    21.0   0.29   3.99  11.13     84.70
 plus       1,243.0   1,259.0   16.0    16.0   3.92   0.10   0.32   Pending
 incl.      1,251.0   1,255.0    4.0     4.0   8.72   0.15   0.31   Pending
NE28A-2(2)  1,031.0   1,061.0   30.0    30.0   0.40   0.41   8.04   Pending
 incl.      1,039.0   1,059.0   20.0    20.0   0.36   0.43   9.05   Pending
 plus       1,077.4   1,081.6    4.2     4.2   2.07   0.27   2.36   Pending
NE32-1      1,079.8   1,169.0   89.2    89.2   0.49   1.78   8.43   Pending
 incl.      1,095.0   1,156.0   61.0    61.0   0.45   1.93   9.98   Pending
ND32A(2)    1,048.6   1,099.9   51.3    51.3   0.52   1.82   5.40   Pending
 incl.      1,071.9   1,078.0    6.1     6.1   0.44   3.51   8.50   Pending
 incl.      1,083.3   1,096.9   13.6    13.6   0.25   2.15   8.02   Pending
NF32B-1     1,175.5   1,247.0   71.5    71.5   0.59   2.88   8.38   Pending
 plus       1,261.0   1,285.5   24.5    24.5   1.83   0.20   0.73   Pending
 incl.      1,281.5   1,285.5    4.0     4.0   5.63   0.15   0.75   Pending
NG30        1,148.0   1,185.0   37.0    35.0   0.37   0.21   5.27   Pending
 incl.      1,149.0   1,160.0   11.0    10.0   0.29   0.25   8.40   Pending
NF32B-2     1,153.0   1,221.5   68.5    68.5   0.43   3.13   9.70   Pending
 incl.      1,154.0   1,194.5   40.5    40.5   0.53   3.82  11.44   Pending
 plus       1,235.5   1,256.3   20.8    20.8   2.48   0.12   0.65   Pending
ND28-1      1,009.0   1,043.0   34.0    34.0   0.83   2.01   7.40   Pending
(1) released August 14, 2007
(2) released May 15, 2008

The spacing between drill holes ranges from 62 metres to 143 metres and averages 95 metres and the deposit has so far been drilled along a dip extent of approximately 300 metres and a strike extent of approximately 150 metres. The deposit remains open down dip and along strike to the southeast.

The Neves-Corvo deposits are massive sulphide lenses and associated stockworks which contain zinc- and copper-rich zones. These high-grade zones are typically separate in that they are either high-grade copper or high-grade zinc, but usually occur adjacent to one another. The thickness of the zinc zone within the East Lombador deposit combined with both massive sulphide and stockwork copper mineralization intersected by some drill holes suggests that the deposit could also host a zone of high-grade copper mineralization, similar to the other Neves-Corvo deposits.

Tin content is noted to be elevated in some holes which is considered significant as it may indicate proximity to higher grade copper mineralization. Early mine production at Neves-Corvo included a 4.4 million tonne zone grading 10% copper and 2% tin. Two drills are currently focused on step-out holes in order to determine the deposit limits and explore the potential for a flanking copper deposit.

Neil O'Brien, Senior Vice President of Exploration and Business Development for Lundin Mining commented, "Neves-Corvo remains under-explored and Lombador East is a truly significant base metal discovery that puts Neves-Corvo into a similar class with the likes of Kidd Creek and Red Dog."

"The timing of this discovery couldn't be better with respect to our current options study on the Lombador project."

"Lombador East represents a great return on our exploration dollars and is a potential source of significant new value to our shareholders. Our exploration team in Portugal has done an outstanding job," Dr. O'Brien said.

Sampling and Analytical Protocol:

NQ or BQ-sized drill core was logged, cut in half with a diamond saw and sampled by Company personnel at its facilities at the Neves-Corvo mine. Mineralized intervals are analyzed for a suite of elements including Zn, Cu, Pb and Sn at the Neves-Corvo laboratory using XRF methods. Bob Carmichael, P.Eng., General Manager, Resource Exploration, is the Qualified Person as defined by National Instrument 43-101 and has reviewed and approved the technical information contained in this release.

About Lundin Mining

Lundin Mining Corporation is a rapidly growing, diversified base metals mining company with operations in Portugal, Spain, Sweden and Ireland. The Company currently has six mines in operation producing copper, nickel, lead and zinc. In addition, Lundin Mining holds a development project pipeline which includes the world class Tenke Fungurume copper/cobalt project in the Democratic Republic of Congo and the Ozernoe zinc project in Russia as well as major expansion programs at its Neves-Corvo and Zinkgruvan mines. The Company holds an extensive exploration portfolio and interests in international mining and exploration ventures.

On Behalf of the Board,

Phil Wright, President and CEO

To view the maps accompanying this release please click on the following URL:


Lundin Mining Corporation
Sophia Shane
(604) 689-7842